Loading ...
Loading ...
Loading ...
22
GAS CONNECTION
This appliance shall be installed only by authorised
personnel and in accordance with the manufacturer’s
municipal building codes, water supply regulations,
and any other statutory regulations.
the label which is applied on the glass-window of the
Installation for Natural gas
in the direction shown. Fitting (D) to be supplied by
large or one medium burner alight at maximum.
If stove is to be installed on legs, a gas pipe between
underneath the stove for adjustment and maintenance.
If stove is installed on it’s base, the regulator should be
adjustment.
the cooker at least 60 mm clearance is required.
INSTRUCTIONS FOR THE INSTALLER
17
18
alternative connection.
screw nut male
• An isolating tap and pressure regulator must be
by means of a union connector.
• The gas connection and isolating tap must be
accessible to a service person or inspector.
• The hose assembly must be installed in accordance
permanent deformation and should be able to be
inspected along its entire length. Unions compatible
outlet should be at approximately the same height as
•
chain supplied should be anchored to the lower
pulled forward.
Loading ...
Loading ...
Loading ...