Loading ...
Loading ...
Loading ...
17
461308092_003 10/2013
14
INSTRUCTIONS FOR THE INSTALLER
TECHNICAL INFORMATION
The installations, conversions and maintenance
operations listed in this part must only be carried
out by authorised personnel. The manufacturer
cannot be held responsible for any damage to
persons or property resulting from an incorrect
installation of the appliance.
• The safety and automatic adjustment devices of the
the manufacturer or duly authorised supplier.
• This appliance shall be installed only by
authorised personnel and in accordance with
the manufacturer’s installation instructions, local
Installations and any other statutory regulations.
• Failure to install the appliance correctly could
invalidate any manufactures warranty and lead to
prosecution under the above quoted regulation.
conditions (gas and electrical) are compatible with
the appliance’s adjustment. Refer to data label for
gas type.
• As it is not connected to a device for the evacuation
of the products of combustion, it must be installed in
accordance with current regulations and used in a
paid to the regulations on ventilation.
VENTILATION
All rooms require an openable window or equivalent,
while some rooms require a permanent vent in addition
to the openable window.
Gas Installations. In general, the appliance should
have adequate ventilation for complete combustion
immediate surroundings within safe limits.
The use of a gas appliance results in production of
heat and moisture in the room in which it is installed.
natural ventilation holes open or install a mechanical
ventilation device (mechanical extraction hood).
additional ventilation, for example increasing the level
of mechanical ventilation where present.
UNPACKING YOUR COOKER
you have any doubts do not use the appliance and
call our Service Centre.
• Do not move the appliance by the handles.
• Some parts mounted on the appliance are protected
pin.
The packaging materials used (cardboard,plastic
bags, polystyrene foam, nails etc.) must not be
left anywhere within easy reach of children as
they are a potential hazard source.
The appliance should be positioned in good light
and free from draughts. Any adjoining wall surface
burner must be a suitable non-combustible material
Any combustible construction above the hotplate
the top of the burner.
be protected by a non-combustible protective layer
ensure the surface temperature of the combustible
Loading ...
Loading ...
Loading ...