Loading ...
Loading ...
Loading ...
35
AUTOMATIC OVEN COOKING
To cook food automatically in the oven, it is
necessary to:
1. Set the length of the cooking period.
2. Set the end of the cooking time.
3. Set the temperature and the oven
cooking program.
These operations are done in the following
way:
1. Set the length of the cooking period by
pushing the
button and the button
to increase, or to decrease if
you have passed the desired time (g.
37). The AUTO and the
symbol
will illuminate.
2. Set the end of the cooking time by
pressing the
button (the cooking
time already added to the clock time will
appear), and the
button (g. 38); if
you pass the desired time you may get
back by pushing the
button.
After this setting, the symbol
will disappear. If after this setting,
the AUTO ashes on the display
and a buzzer sounds, it means there
was an error in the programming,
that is that the cooking cycle has
been superimposed on the clock. In
this case, modify the end of cooking
time or the cooking period itself by
following again the above mentioned
instructions.
3. Set the temperature and the cooking
program by using the switch and
thermostat knobs of the oven (see
specic chapters).
Now the oven is programmed and
everything will work automatically, that is
the oven will turn on at the right moment
to end the cooking at the established hour.
During cooking, the
symbol remains
illuminated.
By pushing the
button you can see the
time that remains until the end of cooking.
The cooking program may be cancelled
at any time by pushing
.
At the end of the cooking time the oven will
turn off automatically, the
symbol will
turn off, AUTO will ash and a buzzer will
sound, which can be turned off by pushing
any of the buttons except the
/
buttons.
Turn the switch and thermostat knobs to
zero and put the programmer onto “manual”
by pressing the
button.
Attention: After a power cut the clock resets
to zero and cancels the set programs.
After a power cut, three zeros will ash on
the display.
Figure 37 Figure 38
Loading ...
Loading ...
Loading ...