Loading ...
Loading ...
Loading ...
22
“HI-LIGHT” DOUBLE ZONES
(gs. 25, 26)
■ The heating element is formed of 2 coils of resistant material which reaches the
working temperature quickly.
■ This zone is controlled by a continuous energy regulator switch (g. 24). The heat
intensity can be regulated continuously from “0” to “12” (max).
■ Check that the hob is clean and then switch on by turning the control knob.
■ When the hob is working, the power on indicator light will be on.
■ To turn on both zones of the double element, turn the double element knob fully
clockwise to the position
.
To reduce the heat of the full double element, turn its knob anticlockwise to setting “12”
or lower. Adjust the heat during cooking as necessary.
Note: if you leave the knob at the
position, the full double element will
remain at the highest heat setting.
■ To return to using only the inner zone
of the double element, rst turn the
knob to the “0“ (off) position (you
should feel a click) and then clockwise
to a setting from “1” to “12”.
Figure 24
Figure 25 Figure 26
DOUBLE ZONE
DOUBLE ZONE (OVAL)
Second element
Second element
Loading ...
Loading ...
Loading ...