Loading ...
Loading ...
Loading ...
Installing the Camera on Your Windshield
NOTICE
The adhesive mount is intended for a long-term installation and can be difficult to remove. You should carefully
consider the mounting location before you install the mount.
Before you can install the adhesive mount onto your windshield, you should review the windshield mounting
considerations (Mounting Considerations, page 1).
For the best results, the ambient temperature should be from 21° to 38°C (from 70° to 100°F) while installing the
camera on your windshield. The adhesive may not bond correctly if the temperature is outside this range. If you
need to install the camera at lower temperatures, you must clear all snow, ice, and moisture from the windshield
and warm the windshield using the vehicle defroster before installing the camera.
The camera attaches to the windshield using the included adhesive mount.
1 Clean the inside of the windshield using water or alcohol, and a lint-free cloth.
The windshield must be free of dust, wax, oils, or coatings.
2 Hold the camera in the desired mounting location on the windshield, and verify the camera has a clear,
unimpeded view.
You should verify the front lens has a clear view of the road and the interior lens has a clear view of the
vehicle cabin. You should avoid placing the camera behind or very close to the rearview mirror, parking tags,
or other objects that may impede the interior view.
3 After you have selected a mounting location with a clear view, remove the protective film from the mount
adhesive.
2 Getting Started
Loading ...
Loading ...
Loading ...