Loading ...
Loading ...
Loading ...
Unsatis
-factory
washing
result
Unsatis
-factory
drying
result
Problem
The dishes
are not clean
Cloudiness
on glassware
Black or gray
marks on dishes
Detergent left in
dispenser cups
The dishes
are not drying
Possible Causes
The dishes were not
loaded correctly.
The programme was
not powerful enough.
Not enough detergent
was dispensed.
Items are blocking
the path of spray arms.
The filter combination
in the base of wash
cabinet is not clean or
is not correctly fitted.
This may cause
the spray arm jets
to get blocked.
Combination of soft
water and too much
detergent.
Aluminum utensils
have rubbed against
dishes.
Dishes block
detergent cups.
Improper loading
Too little rinse-aid
Dishes are removed
too soon
Wrong program
has been selected
Use of cutlery with
a low-quality coating
What to Do
See notes in " Loading the
Dishwasher Baskets ".
Select a more intensive
programme.
See" Wash Cycle Table ".
Use more detergent, or change
your detergent.
Rearrange the items so that the
spray can rotate freely.
Clean and/or fit the filter
combination correctly.
Clean the spray arm jets. See
"Cleaning the Spray
Arms".
Use less detergent if you have soft
water and select
a shortest cycle to wash the
glassware and to get
them clean.
Use a mild abrasive cleaner to
eliminate those marks.
Re-loading the dishes properly.
Load the dishwasher as suggested
in the directions.
Increase the amount of
rinse-aid/refill the rinse-aid
dispenser.
Do not empty your dishwasher
immediately after
washing. Open the door slightly so
that the steam can
escape. Begin unloading the
dishwasher only once t
he dishes are barely warm to the
touch. Empty the low
basket first. This prevents water
form dropping off
dishes in the upper basket.
In short program the washing
temperature is lower.
This also lowers cleaning
performance. Choose
a program with a long washing
time.
Water drainage is more difficult with
these items.
Cutlery or dishes of this type are
not suitable for
washing in the dishwasher.
Error Codes
When some malfunctions come on, the appliance will display error codes to warn you:
Loading ...
Loading ...
Loading ...