Loading ...
Loading ...
Loading ...
EN
157
Picture mode
► Rotate the lens' focusing ring
• All sharply rendered subject detail edges are marked in red.
This happens according to the principle maximum contrast =
sharp. Alternatively or additionally (see previous page), the
monitor image switches to a 3x magnification mode. Also, a
display appears indicating both the present (marked in white)
and the second available magnification factor.
Touching the unmarked factor leads to a 6x magnification, or
switches between the two.
The enlargement level that appears first is always the last one
used. Approx. 5s after the focusing ring was turned the last
time, the camera automatically switches back to the original
monitor image. This can also be initialized at any time by
pressing the shutter button to the 1st pressure point.
► Set the correct focus for the desired subject parts
1/80002.8F 12500ISO EV
-3 2 1 0 21 3+
823412MP
x3
x6
A
INFO
0,3 1 2 ∞
∞631
ft
m
1
2
Fig. 50 b
1 x3-/x6 displays for changing
enlargement
2 Distance scale, the bar indicates
the current setting (only appears in
conjunction with the status dis-
plays, see 'INFO displays')
Notes:
• Focus peaking is based on subject contrast, i.e. differences
between bright and dark.
• If you are using the Leica M- or R-Adapter L, the left setting dial
assignment changes to
FOCUS AID x3, x6 or Off!
• In autofocus mode, too, the automatically set distance can be
altered manually with the distance setting ring when the shutter
release is pressed halfway.
Loading ...
Loading ...
Loading ...