Loading ...
Loading ...
Loading ...
[MIC LEVEL]
When recording, the input level from the built-in microphones and the external microphone
terminal can be adjusted.
• Change the mode to _ .
• Switch to Manual Mode. (-> 82)
1 Select the menu.
: [RECORD SETUP] _ [MIC LEVEL] _ desired setting I
[AUTO]: AGC is activatedi and the recording level is adjusted
[SET-F_]/[SET]: The desired recording level can be set,
• It is possible to select the setting from the quick menu in Manual Mode. (-) 45) The
microphone level returns to the setting adjusted previously, and it cannot be set from the
quick menu.
2 Touch (_/(_ to adjust the microphone input
level.
• Touch _ to activate/disactivate AGC.
When AGC is activated, the icon is surrounded by
yellow and the amount of sound distortion can be
reduced. When AGC is disactivated, natural recording
can be performed.
• Adjust the microphone input level so that the last
2 bars of the gain value are not red. (Otherwise, the O Center
sound is distorted.) Select a lower setting for Q Front left
microphone input level. (_ Back left
3 Touch [ENTER] to determine the microphone _) Front right
input level and then touch [EXIT]. (_) Back right
• [ i ]m|i|l (Microphone input level meter) appears _) Microphone input level
on the screen.
• When switching to Intelligent Auto Mode, the setting is fixed to [AUTO] and cannot be
changed.
• When [MIC SETUP] is [ZOOM MIC], the volume will be different depending on the zoom
rate.
• When [MIC SETUP] is set to [STEREO MIC] or external microphone input is used, the
sound is stereo (2 ch) and only the front-left and front-right input level meters function.
• The microphone input level meter shows the largest volume for the microphones.
• You cannot record with the audio completely muted.
74
VQT2M75
Loading ...
Loading ...
Loading ...