Loading ...
Loading ...
Loading ...
13
FINAL INSTALLATION
2.
Hardware Used
AA
Blade Screw x 15
Fiber Blade Washer x 15
BB
DANGER: To reduce the risk of serious bodily
injury, DO NOT use power tools to assemble the
blades (I). If screws are overtightened, blades (I)
may crack and break.
Insert the blade (I) through the slot on the band of
the motor housing (D). Align holes in blade (I) with
holes in plate on underside of motor. Attach the
blade (I) with blade screws (AA) and fiber blade
washers (BB). Then, tighten each blade screw (AA),
starting with the one in the middle. Repeat for
remaining blades (I).
4.
3.
Remove one motor plate screw (J) from motor
plate preassembled on the underside of the
motor housing (D) and partially loosen the
other two motor plate screws (J). Align slotted
holes in light kit fitter (H) with loosened motor
plate screws (J), allowing male plug from
motor housing (D) to come through hole in
light kit fitter (H). Twist light kit fitter (H) to lock.
Re-insert the motor plate screw (J) that was
removed and securely tighten all three motor
plate screws (J).
Remove three preassembled light kit fitter
screws (K) from posts on underside of light kit
fitter (H). Save light kit fitter screws (K) for later
use.
Connect male plug from motor housing (D) to
female plug from light kit fitter (H), matching up
the colors on the plugs for correct fit. Make sure
plugs connect tightly.
3
2
D
BB
AA
3
4
3
Male Plug
Male Plug Female Plug
I
J
I
J
I
J
H
K
K
D
D
H
Motor
Plate
I
Loading ...
Loading ...
Loading ...