Loading ...
Loading ...
Loading ...
E-6
System connection
Make sure to unplug the AC power cord before making any connections.
AC outlet (AC 120 V ~ 60 Hz)
FM antenna
External FM
antenna for
better reception
(not supplied)
AM loop antenna
Red
Black
To left
speaker
To right
speaker
CAUTION:
TO PREVENT ELECTRIC
SHOCK, MATCH WIDE BLADE
OF PLUG TO WIDE SLOT,
FULLY INSERT.
■ Speaker connection
+ speaker terminal red wire
- speaker terminal black wire
● Use speakers with an impedance of 6 ohms or more,
as lower impedance speakers can damage the unit.
● Do not mistake the right and the left channels. The
right speaker is the one on the right side when you
face the unit.
● Do not let the bare speaker
wires touch each other.
● Do not allow any objects to fall
into or to be placed in the bass
reex ducts.
● Do not stand or sit on the
speakers. You may be injured.
Incorrect
■ Antenna connection
Supplied FM antenna:
Connect to the FM 75 ohms jack and position it where
reception is best.
External FM antenna:
Use an external FM antenna (75 ohms coaxial cable) for
better reception. Disconnect the supplied FM antenna wire
before use.
Supplied AM loop antenna:
Connect to the AM terminal and position it where reception
is best. Place it on a shelf, etc., or attach it to a stand or a
wall with screws (not supplied).
Installing the AM loop antenna
< Attaching to the wall >< Assembling >
wall
Screws (not
supplied)
Note:
Keep the antenna away from the unit or AC power cord to
avoid noise pickup.
■ Demonstration mode
● The rst time the unit is plugged in, the unit will enter
the demonstration mode. You will see words scroll.
● To cancel the demonstration mode, press the DEMO
button (remote control) once. The unit will enter the
Bluetooth standby mode.
● To cancel the Bluetooth standby mode, press the ECO
button (remote control). The unit will enter the low
power consumption mode.
● To return to the demonstration or Bluetooth standy
mode, press the DEMO button again.
● During demonstration or Bluetooth standby mode,
NFC function is activated once your device touches
the NFC detection area.
■ AC power connection
After all connections have been made correctly, plug the
AC power cord into the AC outlet.
Note:
Unplug the AC power cord from the AC outlet if the unit will
not be in use for a prolonged period of time.
Loading ...
Loading ...
Loading ...