Loading ...
Loading ...
Loading ...
E-18
Timer and sleep operation (Remote control only) (continued)
Timer playback:
The unit turns on and plays the desired source (CD,
TUNER, USB, AUDIO IN, TAPE) at a preset time.
This unit has 2 types of timer: ONCE TIMER and DAILY
TIMER.
Once timer (“
” indicator):
Once timer play works for one time only at a preset time.
Daily timer (“DAILY” indicator):
Daily timer play works at the same preset time every day
that we set. For example, set the timer as a wake-up call
every morning.
Using the once timer and daily timer in combination:
For example, use the once timer to listen to a radio
program, and use the daily timer to wake up.
1 Set the daily and once timer (pages 18).
1 minute or more
Daily timer Once timer
Stop StartStart Stop
■ Timer playback
Before setting timer:
● Check that the clock is set to the correct time. If it is not
set, you cannot use the timer function.
● For timer playback: Plug in USB, load disc or tape to
be played.
1 Press the ON/STANDBY button to turn the power on.
2 Press the TIMER button.
3 Within 10 seconds, press the or button
to select “ONCE” or “DAILY”, and press the ENTER
button.
4 Within 10 seconds, press the or button
to select “TIMER SET”, and press the ENTER button.
5 To select the timer playback source (CD, TUNER,
USB, AUDIO IN, TAPE), press the or
button. Press the ENTER button.
When you select the tuner, select a station by press-
ing the
or button, and then press the
ENTER button. If a station has not been programmed,
“NO PRESET” will be displayed and timer setting will
be canceled.
6 To adjust the day, press the or button
and then press the ENTER button.
7 Press the or button to adjust the hour,
and then press the ENTER button.
8 To adjust the minutes, press the or
button and then press the ENTER button.
9 Set the time to nish as in steps 7 and 8 above.
10 Adjust the volume using the VOLUME control, and then
press the ENTER button.
11 Press the ON/STANDBY button to enter the power
standby mode. “TIMER” indicator lights up.
1
2
3
4
5
4
5
3
2
1
OPEN / CLOSE
TUNING
PRESET
USB
AUDIO IN
TAPE
TUNER
CD
TIMER
ON/ STANDBY
(BAND)
VOL.
VOL.
REMOTE
SENSOR
12 When the preset time is reached, playback will start. The
volume will increase gradually until it reaches the preset
volume. The timer indicator will blink during timer playback.
13 When the timer end time is reached, the system will
enter the power standby mode automatically.
Once timer:
The timer will be canceled.
Daily timer:
The timer operates at the same time every selected
day. Cancel the daily timer when it is not in use.
Notes:
● When performing timer playback using another unit
connected to the USB terminal or AUDIO IN jack, se-
lect “USB” or “AUDIO IN” in step 5. This unit will turn on
or enter the power standby mode automatically. How-
ever, the connected unit will not turn on or off.
● To stop the timer playback, follow step “Cancelling
the timer setting” of this page.
Checking the timer setting:
1 Turn the power on. Press the TIMER button.
2 Within 10 seconds, press the or button
to select “ONCE” or “DAILY”, and press the ENTER
button.
3 Within 10 seconds, press the or button
to select “TIMER CALL”, and press the ENTER button.
Cancelling the timer setting:
1 Turn the power on. Press the TIMER button.
2 Within 10 seconds, press the or but-
ton to select “ONCE” or “DAILY”, and press the ENTER
button.
3 Within 10 seconds, press the or button
to select “TIMER OFF”, and press the ENTER button.
Timer will be canceled (the setting will not be canceled).
Reusing the memorized timer setting:
The timer setting will be memorized once it is entered. To
reuse the same setting, perform the following operations.
1 Turn the power on. Press the TIMER button.
2 Within 10 seconds, press the or button
to select “ONCE” or “DAILY”, and press the ENTER
button.
3 Within 10 seconds, press the or button
to select “TIMER ON” , and press the ENTER button.
4 Press the ON/STANDBY button to enter the power
standby mode.
■ Sleep operation
The radio, disc, USB and Audio In can all be turned off
automatically.
1 Play back the desired sound source.
2 Press the SLEEP button.
3 Within 5 seconds, press the SLEEP button repeatedly
to select the time.
“SLEEP 90”
“SLEEP 80” ... “SLEEP 10”
“SLEEP OFF”
4 “SLEEP” indicator will appear.
5 The unit will enter the power standby mode
automatically after the preset time has elapsed. The
volume will be turned down 1 minute before the sleep
operation nishes.
To conrm the remaining sleep time:
1 While “SLEEP” is indicated, press the SLEEP button.
To cancel the sleep operation:
Press the ON/STANDBY button while “SLEEP” is indicated.
To cancel the sleep operation without setting the unit to the
standby mode, proceed as follows.
1 While “SLEEP” is indicated, press the SLEEP button.
2 Within 5 seconds, press the SLEEP button repeatedly
until “SLEEP OFF” appears.
Loading ...
Loading ...
Loading ...