Loading ...
Loading ...
Loading ...
Installing the Seat
Howto Install the Seat
1. Carefully removethe plastic bagfrom the seat. Usethe
fasteners shown belowto install the seat. Thefasteners
are shown at full size.
Assemblingthe SteeringWheel
Howto AssembletheSteeringWheel
Tools Required:3/8" SocketWrench
Attachthe steering wheel asfollows:
t_
t_
3
o"
Figure4: Seatparts
A - Wingbolt (Also see 'E'in Figure3)
B - Washer(Also see 'F'in Figure 3)
NOTE:Fastenersmay be attachedto seat for shipping
purposes, if so remove fasteners before proceeding.
2. Align the holes inthe seat hinge to the holes in the
seat (Figure 5). Fastenthe seat to the seat hingewith
the fasteners asshown.
3. Checkthe operating position of the seat. If the seat
needsto be adjusted,loosen the two wing bolls.Slide
the seat forward or backwardalong the seat adjusting
holesas shown. Tighten the wingbolts(A).
Figure 6: Steering wheelparts
A - Screw (Also see 'C' in Figure3)
B- Washer (Also see 'D' in Figure3)
1. Make sure the front wheels point forward.
2. Slide the bellows overthe steering post
(Figure7).
NOTE:Beforeattachment of the steering wheel, make
surethat the front wheels point forward and are
straight. Forproper alignment of the steering wheel,
seeFigure7.
3. Slide the steeringwheel onto the steeringpost.
4. Usethe fasteners shown aboveto secure the steering
wheel. Thefasteners are shown at full size.Tighten the
screw until snug and then add 1/4 turn. DONOTover
tighten.
5. Attach the coverto the steeringwheel.
6. Some models havean optional decal in the parts bag.
Attach the decal to the center of the steeringwheel as
shown.
Figure5: Seat
A - Wingbolt
B - Washer
C - Seatadjusting hole
D- Seathinge
E - Seat
English
Loading ...
Loading ...
Loading ...