Loading ...
Loading ...
Loading ...
Howto Removethe Mower Deck(46 & 52" Models)
1. Pushthe PTOswitchdown to the DISENGAGEposition.
2. Openthe deck levelposition cover, and movethe deck
lift lever to the leveladjustment position (Figure34).
WARNING:The decklift lever isspringloaded.
Makesure the decklift lever is lockedin the LEVEL
ADJUSTMENTposition.
3. Removethe hair pins and the washersfrom the
adjuster arms (Figure35). See illustrations "C" and
_D _"
4. Removethe hair pins and washers from the
suspensionlinks. Seeillustrations "A" and "B".
Howto Install the Mower Deck(46 & 52" Models)
1. Push the mower deck under the right side of the unit.
2. Put the mower drivebelt around the clutchpulley.
Make surethe "V" side of the mower drivebelt is
against the clutchpulley.Also, make surethe mower
drivebelt isnot twisted. Seeillustration"F".
3. Attachthe fronthangerto the axlesupport with the
hangerrod. Fastenwith the fasteners as shown. See
illustration "E".
4. Make sure the mower drive belt is betweenthe clutch
pulley and the two belt guides, Seeillustration "F".
5. Attach thesuspensionlinksto the lifter assembly.
Fastenwith thewashers and hair pins. Seeillustrations
"A" and "B".
6. Attach the right and the left adjuster arms to the
suspension brackets.Fastenwith the washersand hair
pins. Seeillustrations "C" and "D".
7. Make surethe mower deck is level.Seethe instructions
on "How To LevelThe Mower Deck".
8. Checkthe operation of the PTOclutch.Seethe
instructions on "How To Adjust The PTOClutch".
e-
e-
e"
,E
o_
Figure34. Decktiff lever
A - Decklevelposition cover (partially hidden)
B - Deckleveladjustment position
5. Disconnectthe front hangerfrom the axlesupport. See
illustration "E".
6. Removethe mower drivebelt from the clutchpulley.
Seeillustration "F".
7. Pull the mower deck awayfrom the right side of the
unit.
8. To operatewithout the mower deck, move the deck lift
leverto the TOPposition.
30
English
www.snapper.com
Loading ...
Loading ...
Loading ...