Snapper SLT23460FC 7800318 tractor

User Manual - Page 16

For SLT23460FC.

PDF File Manual, 48 pages, Download pdf file

Loading ...
Loading ...
Loading ...
e--
O
.B
€_
a,.,
Howto Usethe CruiseControl
To engagethe cruise control:
1. Slowly push the speedcontrolpedal forward to the
desired speed(Figure12).
2. Pull up on the cruisecontrolknob(Figure13). Release
the speedcontrolpedal. Theunit should continue
traveling forward at the desiredspeed.
NOTE:The cruise control only operatesin forward
speeds.
To disengagethe cruise control:
1. Pushthe speedcontrolpedal (Figure12), OR
2. Pushthe brakepedal.
,_ WARNING:Do notengagethe cruisecontrolwhen
drivingon slopes,or whenpeopleor animalsare in
thevicinity.
\
Figure 13:Cruisecontrol
A - Cruise Control knob
Howto Drive in Reverse
1. Look to the rear.
2. Slowly push the speedcontrolpedal to the REVERSE
position.
Howto ChangeDirection
CAUTION:To changedirections,do not usetheleft brake
pedal. Useonlythespeed controlpedal.
1. Slowly removeyour foot from the speed controlpedal.
Thespeedcontrolpedal will automatically returnto the
NEUTRALposition.
2. Whenthe unit stops, slowly move the speed control
pedal to the desired direction.
SpeedControlPedal Positions
Theforward speedis controlled by the position of the speed
controlpedal. Thefollowing chart provides functions along
with the pedal positions.Always operatethe engine with the
throttlecontrolin the FASTposition.
Function
Trimming
Snow Thrower
Bagging Grass
Normal Mowing
EasyMowing
Snow Blade
Transport
Pull Behind
Attachments
Pedal Positon
1/3
1/3 to 1/2
1/2 to 2/3
1/2 to 3/4
FULL
1/3 to 1/2
ThrottlePosition
FastThrottle
Howto DisconnecttheTransmission
To push the unit, usethe automaticdrivedisconnectto
releasethe transmission. Theautomaticdrive disconnectis
locatedon the right rear of the unit.
1. Theengine must be off.
2. Pull out and lockthe automaticdrivedisconnectinthe
PUSHposition (Figure13). Thetransmission is now
releasedandthe unit can be pushed.
NOTE:In cold weather, the heavyviscosity oil in the
transmission will makethe unit difficult to push.
3. To engagethe transmission, unlock and push in the
automaticdrivedisconnect.The transmission is now
connectedand readyto operate.
14
English
www.snapper.com
Loading ...
Loading ...
Loading ...