Loading ...
Loading ...
Loading ...
13
CONNECTION OF THE POWER SUPPLY CABLE
Important! This cooker must be connected to the electricity supply only by an
authorised person.
■ Unhook the terminal board cover by inserting a screwdriver into the two hooks “A” (g.
7).
■ Unscrew the screw “D” and open completely the cable clamp “E” (gs. 8 - 9 - 10).
■ Position the U bolts “F” onto terminal board “G” (gs. 8 - 9- 10) according to the
diagrams in g. 11.
■ Connect the phase, neutral and earth wires to terminal board “G” according to the
diagrams in g. 11.
■ Strain the feeder cable and block it with cable clamp “E” (by screwing screw “D”).
■ Close the terminal block cover (check the two hooks “A” are correctly hooked).
NOTE: The earth conductor must be left about 3 cm longer than the others.
VOLTAGE AND POWER CONSUMPTION
220-240 V 50 Hz 8470 W (36.8 A) (diversity not applied)
FEEDER CABLE SECTION
“TYPE H05RR-F or H05VV-F”
220-240 V ac 3 x 4 mm
2
(**)
380-415 V 3N ac 5 x 2,5 mm
2
(**)
380-415 V 2N ac 4 x 4 mm
2
(**)
(**) Connection with wall box connection.
– Diversity factor applied.
– A diversity factor may be applied to the
total loading of the appliance only by a
suitably qualied person.
A
Figure 7
Loading ...
Loading ...
Loading ...