Loading ...
Loading ...
Loading ...
4 Configuration D-Link Smart Managed Switch User Manual
22
access to MIB objects in the Switch’s SNMP agent.
Table 4.8
Click Apply to create a new SNMP community.
Management > SNMP > SNMP Host Settings
This SNMP Host Settings page is used to configure the recipients of the SNMP notifications.
Figure 4.22 – Management > SNMP > SNMP Host Settings
The fields that can be configured for SNMP Host Settings are described below:
Item Description
Host IPv4 Address
Specify the IPv4 address of the SNMP management host.
User-
based Security
Model
Specify the security model. The options to choose from are
SNMPv1 and SNMPv2c.
Community String
Specify the community string for the management host.
Table 4.9
Click Apply to make the configurations take effect.
Management > D-Link Discovery Protocol
For devices that support the D-Link Discovery Protocol (DDP), this page allows users to enable or disable
DDP, and configure the DDP packet report timer.
Figure 4.23 – Management > D-Link Discovery Protocol
The fields that can be configured for D-Link Discovery Protocol are described below:
Item Description
D-
Link discovery
Protocol State
Specify to enable or disable the D-Link discovery protocol feature of
the Switch.
Report Timer
Configure the report timer of the D-
Link Discover Protocol in
seconds. The values are 30, 60, 90, 120 or Never. The default is 30
seconds.
Table 4.10
Click Apply to make the configurations take effect.
L2 Features > FDB > Static FDB > Unicast Static FDB
The Unicast Static FDB page allows user to view and configure the static unicast forwarding settings on the
Switch.
Loading ...
Loading ...
Loading ...