Loading ...
Loading ...
Loading ...
ASSEMBLY
DANGER:
DO NOT START THE ENGINE WITHOUT THE
GUIDE BAR AND CHAIN COMPLETELY
ASSEMBLED° OTHERWISE, THE CLUTCH
CAN COME OFF AND SERIOUS INJURY
CAN RESULT.
ALWAYS WEAR GLOVES WHEN HANDLING
THE CHAIN, THE CHAIN CAN BE SHARP
ENOUGH TO CUT YOU EVEN THOUGH W IS
TOO DULL TO CUTWOOD.
HOWTO ASSEMBLEYOUR CHAIN SAW
BAR AND CHAIN ASSEMBLY (Fig.6-12)
, Loosen and remove the 2 bar clamp nuts°
= Remove bar clamp.
° Remove and throw away blue shipping spacer:
= Turn adjusting screw by hand counterclockwise untii
adjusting pin just touches the stop (see Fig.7)..
= Mount guide bar with slotted end over both guide bar
mounting bolts. Insert adjusting pin into the lower hole in
the guide bar. Install the bar with "Craftsman" logo in up
position(see Fig. 8)_
- Carefully remove chain from bag. Position chain with the
drive linksas shown Fig,.9.
° Place chain over and behind the clutch drum. Fig..10..
= Fit bottom of drive links between teeth in sprocket nose.
o Fit chain drive links into top of guide bar: Fig. 9.
Bar Clamp
Nuts
Bar
Blue Shi Spacer
Figure6
Clutch Drum
Clutch
Drum
Lower Hole
Figure 8
Guide Bar
Mourltin_;Bolts
Figure 9
Screw
Chain
Behind The
Clutch Drum
Figure 10
Figure7
Loading ...
Loading ...
Loading ...