Loading ...
Loading ...
Loading ...
CUSTOMER RESPONSIBiLITiES
MAINTENANCE SCHEDULE
Filt in dates as you complete regular service
Check for damaged or worn parts
Check for loose fasteners & parts
Check chain tension
Check Chai'n"sharpness
....Ciqeck guide bar condition
Check guide bar lube
Clean unit & labels
Clean air filter
Clean/inspect spark arrestor screen & inspect muffler
Replace spark plug
Replace fuel filter
GENERAL RECOMMENDATIONS
The warrantyon this unit does not cover items that have
been subjected to operator abuse or negligence° To receive
full value from the warranty, the operator must maintain unit
as instnJctedin this manual
Some adjustments will need to be made periodically to
properly maintain your unit.
All adjustments in the "Service and Adjustments" section of
this manual should be checked at least once each season.
. Once a year, replace the spark plug,replace air filter ele-
ment and check guide bar and chain for wear. A new
spark plug and a clean/new air filter element assures
proper air4uel mixture and helps your engine run better
and last longer.
• Follow the maintenance schedule in this manual
WARNING:
DISCONNECT THE SPARK PLUG BEFORE
PERFORMING MAINTENANCE EXCEPT FOR
CARBURETOR ADJUSTMENTS,
INSPECTTHE ENTIRE UNIT. REPLACE DAM-
AGED PARTS. CHECK FOR FUEL LEAKS
AND MAKE SURE ALL FASTENERS ARE IN
PLACE AND SECURELY FASTENED.
LUBRICATION CHART
Before After Every Every Yearly
Use Use 5 Hrs,r 25 Hrs ,,
..... i ,
v"
v"
v"
v"
v"
Service Dates
I
!
'1 ....... ....
BEFORE USE
CHECK FOR DAMAGED OR WORN PARTS
The following damaged!worn parts should be referred to
your Sears Service Center,
NOTE: It is normal for a small amount of oil to appear
under the saw after engine stops. Do not confuse this with
a leakingoil tank.
• On/Stop Switch - ensure on/stop switch functions prop-
erly by moving the switch to the "Stop" position and
assure that engine stops, then restart your engine and
continue,
• Fuel Tank - discontinue use of chain saw if fuel tank
show signs of damage or leaks_
• Oil Tank - discontinue use of chain saw ifoil tank shows
signs of damage or leaks.
• Chain Catcher - replace chain catcher if bent, cut, or
damaged in any way,
CHECK FOR LOOSE FASTENERS AND PARTS
• Bar Clamp Nut
• Chain
• Muffler
• Cylinder Shield
• Air Filter
• Clutch Drum/Sprocket
• Handle Screws
• Starter Housing
• Handguard
(£ Bar Oil Fill Cap
@Sprocket \
O Craftsman chain saw bar oil
® Craftsman bar sprocket lube
-19-
Loading ...
Loading ...
Loading ...