Loading ...
Loading ...
Loading ...
28
Basic Features
Setting the Clock
The oven includes time functions that require the current
time to be set. It is therefore important to set the clock
before beginning to use the oven. The oven cannot be in
a cooking mode to access the clock set mode.
To set the clock:
1.
The oven must be in Standby mode (oven is powered
on, but no cooking mode or timer in operation).
2.
To access the clock set mode:
Press the Settings button. The display shows “SET
CLOCK”. Press Enter to edit the clock.
3.
Use the numeric keypad to enter the desired time.
Each number pressed is entered at the right and
moving previously entered digits to the left. To set
“12:45 pm”, press 1,2,4,5.
4.
When the desired time is entered, set the time by
pressing Enter.
The clock is now set and running.
Setting the Cooking Mode and Temperature
There are two alternate methods to set cooking mode
and temperature.
To set the Cooking Mode first, then the temperature:
1.
Press the desired Cooking Mode button. The cooking
mode and default temperature are displayed. The
temperature flashes to show it can be edited.
2.
Press Enter to start the mode using the default
temperature.
3.
To change the temperature, enter the new temperature
using the numeric buttons. For example, changing
temperature to 375°. Press Enter to set the updated
temperature.
Note: The new temperature is automatically set after
10 seconds if Enter is not pressed.
4.
Preheating starts.
Note: If a temperature is entered that is not within the
allowed range for the mode, an error tone will sound
and the lower part of the screen will display “TEMP
NOT ALLOWED”.
To set the Temperature first and then the Cooking
Mode (not for Broil or Convection Broil):
1.
Press the numeric keys to enter the desired
temperature setting. The temperature entered is
displayed beside the current time.
2.
Select a cooking mode that is compatible with the
temperature entered. If no cooking mode is selected
within 5 seconds of setting the temperature, an error
tone sounds and a “SELECT MODE” message is
displayed and blinks.
Loading ...
Loading ...
Loading ...