Falcon NEX110SOEIIV-CH Nexus Steam 110cm Freestanding Electric Oven/Stove Ivory

User Manual - Page 15

For NEX110SOEIIV-CH.

PDF File Manual, 56 pages, Read Online | Download pdf file

NEX110SOEIIV-CH photo
Loading ...
Loading ...
Loading ...
11
Residual Heat Indicator, H
After use, a cooking zone will remain hot for a while as heat
dissipates. When a cooking zone is switched o the residual
heat indicator symbol [H ], will appear in the display. This
shows that the cooking zone temperature is above 60 °C and
may still cause burns. Once the temperature has dropped to
below 60 °C the [H ] will go out.
Child Lock,
n
IMPORTANT: The child lock can only be activated
when all the cooking zones are switched o.
To prevent the unwanted use by children, the hob can be
locked.
To lock the hob, simultaneously turn the two left-hand
controls counter-clockwise (Fig. 2.6) and hold until the
symbol appears in the centre of the hob control display
(Fig. 2.7).
NOTE: [A ] will ash when locking the hob – this is normal.
Locking the hob will NOT aect the ovens; they can still be
used.
To unlock the hob, simultaneously turn the two left-hand
controls counter-clockwise and hold until the
symbol
disappears from the centre of the hob control display.
Low Temperature Setting, L1/L2/L3
n
This function should only be used when heating
from cold
Each cooking area is equipped with 3 low temperature
settings:
L1 will maintain a temperature of about 44 °C – ideal for
gently melting butter or chocolate.
L2 will maintain a temperature of about 70 °C – ideal for
keeping food warm, once it is cooked.
L3 will maintain a temperature of about 94 °C – ideal for
simmering (bring the pan to the boil and then select L3
to keep soups, sauces, stews, etc at an optimal simmer).
The maximum time these settings can be used is 2 hours,
after which the hob will switch o automatically. If required,
you can immediately restart the Low Temperature function by
reactivating L1 or L2. To increase the heat, just turn the control
knob to the required level.
The maximum times for all other power levels are shown in
Table 2.2.
Fig. 2.6
Fig. 2.7
Table 2.2
Power Level Maximum Operating Time
L1, L2 and L3 2 hours
1 6 hours
2 6 hours
3 5 hours
4 5 hours
5 4 hours
6 1.5 hours
7 1.5 hours
8 1.5 hours
9 1.5 hours
Power Boost 10 minutes
Loading ...
Loading ...
Loading ...