Loading ...
Loading ...
Loading ...
28
TROUBLESHOOTING
Problem Possible cause Solution
The oven is not working.
Power cut.
Disconnection from the mains.
Fault.
Check for the presence of mains
electrical power and whether the oven
is connected to the electricity supply.
Turn off the oven and restart it to see if
the fault persists.
The oven is not producing
steam.
Water reservoir not inserted
correctly.
Water reservoir empty.
Check whether the water reservoir has
been placed in the correct position and
whether it is lled with drinking water
up to the “MAX” mark, then start the
function you require again.
The function will not start.
Door not closed correctly.
Function not compatible with food
probe.
Open and close the door, then try to
start the function again.
Select a different function or remove
the food probe.
The time is ashing. Power cut.
You need to reset the time: Follow the
instructions given in the “Using the
appliance for the rst time” section.
The display shows the letter “F”
followed by a number.
Software fault.
Contact you nearest Client After-sales
Service Centre and state the number
following the letter “F”.
Cooking will not start or an
audible signal sounds.
The selected function is not
compatible with the action you
wish to perform.
Select the function again. Perform the
necessary actions.
Remove and then reinsert the food
probe.
The light is not working. The bulb needs replacing.
Follow the instructions for replacing
the bulb given in the “Maintenance and
cleaning” section.
The brightness of the display is
reduced.
Eco mode is activated.
Select “O” in the settings for “Eco
mode”.
Nothing is happening when the
buttons are pressed.
Oven switched off.
Keypad lock activated.
Control panel dirty.
Press
to switch on the oven and
see whether the problem persists.
Deactivate the keypad lock by
pressing the and buttons at
the same time.
Clean the surface of the control panel
with a microfibre cloth (see “Cleaning”
section).
Read the safety instructions carefully
before carrying out any of the following work
Any problems that arise or faults that occur can often be resolved easily.
Before contacting the After-sales Service, check the following table to see whether you can resolve the
problem yourself.
If the problem persists, contact your nearest After-sales Service Centre.
Loading ...
Loading ...
Loading ...