L
N
L
N
INSTALL EASY CONNECT MOUNTING BRACKET:
Electrical
Box
QUESTIONS OR CONCERNS CONTACT CANARM AT:
1-800-265-1833 (English) • 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
SAFETY PRECAUTIONS:
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF
LIGHT FIXTURE. DO NOT REMOVE INSULATION FROM FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE
INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND
OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
3. CAUTION – RISK OF FIRE. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE
CORRECT BRANCH CIRCUIT CONDUCTOR.
L
I
G
H
T
I
N
G
&
F
A
N
S
E
C
L
A
I
R
A
G
E
S
&
V
E
N
T
I
L
A
T
E
U
R
S
Black (Live)
White
(Neutral)
Green (Ground)
Attach easy connect
mounting bracket
to electrical box with
electrical box screws
(not included).
Connect (push) electrical
wires from electric box
(house wiring) into correct
inserts. Black (Live),
White (Neutral),
Green (Ground)
Easy Connect
mounting
bracket
STEP 1
Connect (push) electrical
wires from fixture into
correct inserts.
Black (live),
White (neutral),
Green (ground)
For multiple black (live) &
white (neutral) wires joined
in the electrical box
(house wiring), attach a single
“black” and “white” Jumper Wire
before connecting. Strip 7mm
from a 6” Jumper Wires (AWG 12-24)
supplied. Then connect (push) wires
into correct inserts.
STEP 2 - Option 1
EASY CONNECT®
INSTALLATION INSTRUCTIONS
L
N
Jumper Wire
Jumper
Wire
Option 2 - MULTIPLE ELECTRICAL BOX WIRES
STEP 3
CONNECT LIGHT FIXTURE
CONNECT HOUSE WIRES
!
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
EFM-3
10/15
STEP 4 -
Note: Refer to the style of assembly that matches the
style of your fixture.
Tuck electrical wires into
outlet box and position fixture over
studs or nipple on mounting bracket
assembly. Secure fixture in place with
star washer(s) and cap nut(s).
Note: If required, assemble body and
spread the arms of the fixture out
evenly.
STEP 6 -
Note: Refer to the style of assembly that matches the style of your fixture.
Imported By: CANARM LTD., 2157 Parkedale Ave., Brockville, Ontario, K6V 5V6, Tel: (613) 342-5424, Fax: (800) 263-4598
L
N
STYLE #1
STYLE #2
NOTE: Product May Not Look Exactly As Shown In Figures.
Star
Washer
Stud
Or
Nipple
Cap
Nut
Fixture
L
N
Light
Fixture
STYLE#1
STYLE#2
(L)
Black
(Live)
(L)
Black
(Live)
(L)
Black (Live)
(N)
White
(Neutral)
(N)
White
(Neutral)
(N)
White
(Neutral)
Green
(Ground)
Green
(Ground)
Green
(Ground)
Star
Washer
Socket
Cap Nut
Fixture
STEP 5 -
Note: Refer to the style of assembly that matches the style of your fixture.
Align the center hole in the
fixture with the nipple in
the mounting bracket.
Secure the fixture in place
with a cap nut.
Install specified bulb type and wattage (not included).
Attach the glass shade to the fixture using the
thumb screws (tighten with fingers only).
Shade
Bulb
Thumb
Screw
Key Slots
Tuck the electrical wires into the electrical
box and position the “key slots” over the
support screws. Turn and lock the support
screws into the “key slots”. Tighten the
support screws into place.
