Loading ...
Loading ...
Loading ...
41
CARING FOR YOUR WASHER
When you have finished using your washer
Turn off the taps to prevent the chance of flooding should a hose burst.
Turn off the power at the wall.
Cold water washing
If you always wash with cold water, we recommend that a ‘Warm’ or ‘Hot’ wash be used
at regular intervals, eg every 5th wash should be at least a warm one.
Cleaning your washer
Note: ensure the power is turned off at the wall before cleaning your washer.
Clean the surfaces of your washer with a soft damp cloth only and wipe dry. Do not use
scouring or spray cleaners as they can damage the paint, plastic and panel surfaces.
Clean the fabric softener dispenser after each cycle using warm soapy water.
To remove the agitator for cleaning, unscrew the nut down the centre of the agitator by
turning anti-clockwise.
The soft close lid is not designed to be removable for cleaning. Do not attempt to remove
the lid.
IMPORTANT!
The agitator must be fully pushed onto the shaft when refitting. Tighten the nut firmly
by hand. Ensure the agitator is not loose.
Cleaning the inside of your washer
If you use fabric softener or do regular cold water washing, it is important that you
occasionally clean the inside of your washer.
We recommend that you do not wash clothes during these procedures.
WashSmart™ Eco washer and WashSmart™ washer
1
Fill your washer with hot water. Touch ‘Power’
, select the ‘Allergy’ cycle, ‘High’ water
level, ‘700’ spin speed and ‘Soak’ option.
2
Add about 2 scoops of a concentrated powdered detergent down the centre of the agitator.
3
Touch .
4
Let the washer complete the cycle.
5
Select and run a ‘Regular’ cycle on ‘High’ water level to remove any remaining detergent
and scrud.
QuickSmart™ washer
1
Fill your washer with hot water. Touch ‘Power’ , select the ‘Regular’ cycle, ‘High’
water level, ‘Hot’ water temperature and ‘700’ spin speed. Check that ‘Eco Rinse’ is
notselected.
2
Add about 2 scoops of a concentrated powdered detergent down the centre of theagitator.
3
Touch
.
4
Let the washer complete the cycle.
5
Select and run a ‘Regular’ cycle on ‘High’ water level to remove any remaining detergent
and scrud.
Loading ...
Loading ...
Loading ...