Loading ...
Loading ...
Loading ...
34
CHANGING PRE-SET OPTIONS
Option Adjustment mode
After using your washer a number of times you may want to fine tune some of the
options to suit your wash needs.
There are a number of pre-set options, which can be altered:
1
The wash temperatures, including changing the ‘Cold’ wash temperature to
‘ControlledCold’.
2
The out of balance recovery routine.
3
The number of beeps at the end of the cycle.
4
Resetting to factory default settings.
To enter Option Adjustment mode
1
Turn your washer on at the wall but do not touch ‘Power’
.
2
Touch and hold the and buttons together for 3seconds.
You will hear 3quick beeps indicating you have entered
Option Adjustment mode. The washer will show the default
setting for the ‘Cold’ wash temperature.
The diagram on page 35 shows how the wash cycle
iconsrelate to the options you can change.
The ‘Changing pre-set options’ section explains the
different options in more detail.
3
Use buttons on the panel to make your changes to the
pre-set options.
4
Touch ‘Power’ to return to normal mode. Your washer
willautomatically remember your changes.
To change or reset any of the options, repeat the
abovesteps.
Entering Option
Adjustment mode
Loading ...
Loading ...
Loading ...