Loading ...
Loading ...
Loading ...
22
OPERATION
Four-Way Chute Control (Joystick) (If Equipped)
The four-way chute control™ (joystick) is located on the left side of the handle
panel.
• To change the direction in which snow is thrown, squeeze the button on the
chute control lever and pivot the chute control lever to the right or to the
left.
• To change the angle/distance which snow is thrown, pivot the chute control
lever forward to tilt the chute down and backward to tilt the chute up.
Electric Chute Control Joystick (If Equipped)
DIRECTIONAL CONTROL
ELECTRIC CHUTE
CHUTE
ROTATE
LEFT
CHUTE
ROTATE
RIGHT
CHUTE TILT UP
CHUTE TILT DOWN
The electric chute control (joystick) is located on the right side of the handle panel.
• To change the direction in which snow is thrown, move the joystick to the
right or to the left.
• To change the angle/distance which snow is thrown, pivot the joystick
forward to tilt the chute down and backward to tilt the chute up.
Clean-Out Tool
WARNING
Never use your hands to clear a clogged chute assembly. Shut off engine
and remain behind handles until all moving parts have stopped before
using the clean-out tool to clear the chute assembly.
The chute clean-out tool is conveniently fastened to the rear of the auger housing
with a mounting clip. Should snow and ice become lodged in the chute assembly
during operation, proceed as follows to safely clean the chute assembly and chute
opening:
1. Release both the Auger Control and the Drive Control.
2. Stop the engine by removing the ignition key.
3. Remove the clean-out tool from the clip which secures it to the rear of the
auger housing.
4. Use the shovel-shaped end of the clean-out tool to dislodge and scoop any
snow and ice which has formed in and near the chute assembly.
5. Refasten the clean-out tool to the mounting clip on the rear of the auger
housing, reinsert the ignition key and start the snow blower’s engine.
6. While standing in the operator’s position (behind the snow blower), engage
the auger control for a few seconds to clear any remaining snow and ice from
the chute assembly.
Loading ...
Loading ...
Loading ...