Loading ...
Loading ...
Loading ...
I
ib
I
2
4
3
: signal flow
Press the small green button on the
POWER switch and set the POWER
switch to PLAYER.
Insert a tape. (See page 8.)
Turn on the TV and select the channel to which
you adjusted the RFU adaptor (3 CH or 4 CH).
If you are connecting with audio/video inputs, set your
TV's TV/VIDEO selector to VIDEO.
PLAY
4 PressC> (PLAY). [_
To stop playback, press _ (STOP).
To rewind the tape, press _ (REW).
To advance the tape rapidly, press _ (FF).
When you have finished playback
1 Eject the tape, see page 15.
2 Slide the POWER switch to OFF.
3 Set the VTR (DC OUT)/CHARGE selector on the AC power adaptor to OFF.
8 Basic Camera Operation
By using the Remote Commander. you can be in the picture with your friends and family.
or conveniently control the playback of your tape from a distance.
1Insert two size AA (R6) batteries with ._2/./
the + and - ends properly
positioned. _-_'_
2
3
4
Set the I! REMOTE COMMANDER II;13311_ I __
switch on the battery mounting surface I c="_"=_,lL_ _"--'--'P_-F"_
of the camcorder. _ /1TIr_._\_
If the battery is attached, remove it. _1 '1/(_
Reattach the battery after setting the '_ ..[ \'_/^ ..j
REMOTE COMMANDER ON/OFF switch. _%_
Set the POWER switch on the camcorder as follows:
-- When camerarecording, 1) press the small green button on the POWER switch
and slide it to CAMERA, 2) set the STANDBY switch up.
-- When playing back, slide the POWER switch to PLAYER.
, FRemote sensor
Aim the Commander at the remote _2 m (6.6 ft)
sensor on the camcorder end 2 m (6.6 ft_6.4 fl_ /"]
press the appropriate bu.on on _ __:-_ ____
the Commander. 30 °
(Approximate maximum distance and anglesfor remote control)
Note on the Remote Commander
• Keep the remote sensor away from strong light sources such as direct sunlight or illumination,
Remote control with the Commander may not function properly under such circumstances.
• The command mode of the Commander is VTR2. Avoid using the Sony VCRs with the same
command mode at the same time.
Getting familiar with some buttons
HOLD switch
When you slide the switch in the direction of the
arrow, all the buttons will become inoperable to
prevent any misoperation should you
accidentally press the buttons.
I,,- SLOW and DATA SCREEN buttons
YOU can use the functions of these buttons only
with the Commander.
Battery life
r.=l
HOLD
-- I" SLOW
-- DATA SCREEN
In normal operation, batteries last up to six months. If the camcorder does not
operate properly, the batteries might be exhausted. Replace both batteries with new ones.
To avoid damage from possible battery leakage
Remove the batteries when you will not use the Commander for a long time.
When you connect the receiver of a remote control kit
When you connect the receiver of a remote control kit (not supplied) to the REMOTE U
control connector, be sure to set the I1 REMOTE COMMANDER switch on the battery
mounting surface of the camcorder to OFF. Basic Camera Operation 1 9
c'O
=S'
5''<
=,5"
3
i
i
Loading ...
Loading ...
Loading ...