Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
57
Changing the lower hinge plate over
Pull hinge pin complete with
washer and adjusting foot up-
wards to remove.
Remove stopper.
Undo the screws and remove the
hinge plate .
Loosen the screw for the door closing
aid in hinge plate . Refit the door
closing aid in the hole on the other
side of the hinge plate and then
tighten the screw up again.
Insert stopper into the other hole.
Remove cover .
Take screw out and screw it into
the outside hole on the opposite side.
Turn cover through 180° and refit it
on the opposite side.
Screw hinge plate securely into
position on the new hinge side.
Refit the entire hinge pin , including
the washer and adjustable foot .
Important! The tab on the hinge pin
must still face downwards.
Place door onto the hinge pin from
above.
Close the appliance door.
Inserting the upper hinge plate
Fit hinge plate on the opposite
side and secure it with screws. If
necessary drill pilot holes for the
screws or use a battery operated
screwdriver.
Loading ...
Loading ...
Loading ...