Miele FN 28262 edt/cs Stainless steel/Clean Steel

User Manual - Page 41

For FN 28262.

PDF File Manual, 64 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
Problem solving guide
41
Problem Cause and remedy
Close the appliance door.
The required temperature will re-establish itself after
a while.
If a thick layer of ice has formed, it will reduce effi-
ciency and increase the energy consumption.
Defrost the appliance and clean it.
The ambient temperature is too high. The higher the
room temperature, the longer the compressor will run
for.
See “Installation - Location”.
The temperature setting is too low.
Adjust the temperature.
A large amount of food is being frozen at once.
See “Freezing and storing food”.
The Super freeze function is still switched on.
You can switch off the Super freeze function earlier
to save energy.
The compressor comes
on less and less often
and for shorter periods
of time. The temperat-
ure in the refrigeration
appliance rises.
Not a fault. The temperature setting is too high.
Correct the temperature setting.
Check the temperature again after 24hours.
The frozen goods begin to defrost.
The room temperature is too low for this refrigeration
appliance.
If the room temperature is too low, the compressor
will run less frequently. This may cause the freezer
section to become too warm.
See the information under “Installation – Location”.
Increase the temperature of the room.
Ice or condensation has
built up inside the refri-
geration appliance. The
appliance door may not
close correctly.
The door seal has come out of its groove.
Check that the door seal is correctly positioned in
the groove.
The door seal is damaged.
Check whether the door seal is damaged.
Loading ...
Loading ...
Loading ...