Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
91
Flush-fit installation
Create the worktop cut-out. Remember to maintain the minimum safety dis-
tances (see “Safety distances”).
Solid wood, tiled and glass worktops:
Fix a wooden frame 5,5mm below the top edge of the worktop (see building-in
diagram for “Flush-fit installation”).
Stick the supplied sealing strip under the edge of the hob.
Feed the mains connection cable for the hob down through the worktop cut-out.
Centre the hob in the cut-out.
The gap between the ceramic surface and the worktop must be at least 2mm
wide. This is required so that the hob can be sealed.
Connect the hob to the mains.
Check that the hob works.
Seal the gap between the hob and worktop with a silicone sealant that is heat-
resistant to at least 160°C.
Damage from unsuitable sealant.
Unsuitable sealant can damage natural stone.
For natural stone worktops and natural stone tiles, only use silicone sealant that
is specially formulated for natural stone. Follow the manufacturer's instructions.
Loading ...
Loading ...
Loading ...