Loading ...
Loading ...
Loading ...
EZ-LINK SYSTEM DUAL INSTALLATION
64
16. Open a hot tap.
The first water heater and depending upon the flow from the hot tap, the second water heater will operate
automatically.
17. Increase the hot water flow by turning on an additional hot tap(s).
Check to ensure the flow from each connected hot tap is sufficient to operate both water heaters.
The minimum operating flow rate for each water heater is 1.5 Litres per minute.
18. Turn off the hot taps.
Refer to “Commissioning” on page 73 for details on completing the installation.
Control Board with Ez-Link Connection
874 and 876 series 824, 826 and T26 models
Loading ...
Loading ...
Loading ...