Loading ...
Loading ...
Loading ...
5_
See the upper drawing. To avoid pinching or
damaging the Pulse Wires (28) while you
assemble the Handlebar (39), perform the fol-
bwing actions:
Insert the end of the tetl Pulse Wire (28) inside
the lett side of the Handlebar (39),
Then, insert the end of the right PuIse Wire (26)
inside _herighl side of the Handlebar (39)o
See the lower drawing,, Have a second person
hold the Handlebar (39) in place around the
Upright (2)..
Tip: Avoid pinching the wires. Attach the
Handlebar (39) to the Upright (2) with three MI0
x 20ram Patch Screws (79).
39
28
79
39
Avoid pinching
lhe wires
6, The Console (4) can use four D batteries (not
included); alkaline batteries are recommended,,
IMPORTANT= If the Console has been
exposed to cold temperatures, allow it to
warm to room temperature before Inserting
batteries. Otherwise, you may damage the
console displays or other electronic compo-
nents. Remove the screws, remove the battery
covers, insert the batteries into the battery com-
partments, and reattach the ba!tery covers.
Make sure to orient the batteries as shown
by the diagrams inside the battery compart-
ments.
To purchase a power supply, call your local
Sears store. To avoid damaging the console,
use only a manufacturer=supplied power
supply. Plug one end of the AC adapter into the
jack on the console; plug the other end into an
outlet installed in accordance with all local
codes and ordinances,,
Screws
Batteries
4
Battery
Covers
Batteries
8
Loading ...
Loading ...
Loading ...