Loading ...
Loading ...
Loading ...
HOW TO ADJUST THE REED SWITCH
It the consofe does not display correct feedback, the
reed swilch should be adjusted
To adjust the reed switch, you must remove the right
disc cover and the right pedal disc
Using a fla! screwdriver, remove the right Disc Cover
(18).
Then, remove the M8 x 14mm Button Screws {81)
from the Right Pedal Disc (27), and gently rotate the
Right Pedal Disc out of the way.
Locate the Reed Switch (58) Loosen. but do not
remove, the M4 x 16ram Screw (92)
Next, rotate the Crank Assernbly (24) until a Magnet
(41) is aligned with the Reed Swilch (58),_Slide the
Reed Switch slightly toward or away from the Magnet_
Then. retighten the M4 x 16mm Screw (92).
Rotate the Clank Assembly (24) tar a momenL Repeat
these actions until the console displays correct feed-
back.
When the reed switch is correc=ly adjusted, reattach
the right pedal disc and the right disc cover,
19
Loading ...
Loading ...
Loading ...