Loading ...
Loading ...
Loading ...
Problem solving guide
68
Message Cause and remedy
The symbol lights up
on the start display and
a buzzer also sounds.
The charcoal filter change indicator on the start
display reminds you that the charcoal filter needs to
be changed.
Replace the charcoal filter in the holder (see
“Cleaning and care – Replacing the charcoal filters
(optional accessories)”) and touch the symbol
on the display to confirm that you have changed
the charcoal filter.
The symbol will go out on the start display.
lights up yellow
on the display
and an alarm also
sounds.
The door alarm has been activated.
Touch
on the display for a while.
The alarm tone will stop and the
symbol will go
out.
Close the appliance door.
lights up red in
the display and a
fault code F with
numbers may ap-
pear. An alarm
will also sound.
There is a fault.
Tap on the display to switch the alarm off.
Call the Miele Customer Service Department.
To report the fault, you need the fault code and also
the model number and serial number of your refriger-
ation appliance. You can access this information on
the display.
To do this, touch on the display.
The appliance data required will be shown on the
display.
Confirm with OK to exit the information display and
the fault code will be shown again on the display.
The refrigeration appliance can be switched off dir-
ectly from the fault message display.
There is an appliance fault: this display always has
priority over any settings which have just been selec-
ted.
An appliance fault has priority over any current door
and/or temperature alarms displayed.
Loading ...
Loading ...
Loading ...