Loading ...
Loading ...
Loading ...
Cleaning and care
60
Grasp the plastic surround on the
left-hand side of the stainless steel
trim at its rearmost point.
1. Pull the plastic surround from the ad-
justable shelf and
2. pull the trim off at the same time. The
opposite side will also be released.
3. Then pull the protective strip off.
After cleaning, reattach the stainless
steel trim and protective strip by fol-
lowing the same procedure in re-
verse.
Removing the drawers from the
fridge zone
Pull the drawer out as far as it will go.
The drawer is clipped into place at the
back. It must be unclipped for re-
moval.
Take hold of the sides of the drawer
with both hands and pull the drawer
up and towards you to unclip it.
Do the same on the opposite side.
The drawer is no longer clipped into
place.
Now pull out the drawer firmly from
the front.
Push the telescopic rails back in
again to avoid damaging them.
Risk of damage as a result of in-
correct cleaning.
The telescopic rails contain a special
lubricant which can be washed out
during cleaning, damaging the rails.
Wipe the telescopic rails with a damp
cloth to clean them.
Replacing the drawers
Place the drawer on the fully retrac-
ted telescopic rails.
Loading ...
Loading ...
Loading ...