Loading ...
Loading ...
Loading ...
55
W415-1678 / 08.09.16
EN
6.4 GX36-1 LOG PLACEMENT
PHAZER
TM
logs and glowing embers exclusive to Napoleon, provide a unique and realistic glowing effect that
is different in every installation. Take the time to carefully position the glowing embers for a maximum glowing
effect. Log colours may vary. During the initial use of the appliance, the colours will become more uniform as
colour pigments burn in during the heat activated curing process.
!
WARNING
FAILURE TO POSITION THE LOGS IN ACCORDANCE WITH THESE DIAGRAMS OR FAILURE TO USE
ONLY LOGS SPECIFICALLY APPROVED WITH THIS APPLIANCE MAY RESULT IN PROPERTY
DAMAGE OR PERSONAL INJURY.
LOGS MUST BE PLACED IN THEIR EXACT LOCATION IN THE APPLIANCE. DO NOT MODIFY THE
PROPER LOG POSITIONS, SINCE APPLIANCE MAY NOT FUNCTION PROPERLY AND DELAYED
IGNITION MAY OCCUR.
THE LOGS ARE FRAGILE AND SHOULD BE HANDLED WITH CARE.
76.1A
C. Position the front left log (W135-0688) onto
left side of the log support, in front of the
middle log.
D. Position the front right log (W135-0687) onto
right side of the log support, in front of the
middle log.
A. Place the rear log (W135-0685) fi rmly onto
the two studs at the rear of the support tray.
Ensure the log sits fl at and does not cover
the pilot opening. Place two pins in the holes
located on the top rear of the rear log.
B. Place the middle log (W135-0686) onto the four
studs located on the log support.
E. Place the left crossover log (W135-0690) onto
the pin located in the left side of the rear log,
allow it to rest in the notch of the middle log.
G. Reinstall the door and safety screen, refer to your installation manual for installation instructions.
A
PINS
B
A
B
A
C
D
B
A
C
F. Place the right crossover log (W135-0689)
onto the pin located in the right side of the
rear log, allow it to rest in the notch of the
middle log.
D
B
A
C
D
B
A
C
E E F
Loading ...
Loading ...
Loading ...