Loading ...
Loading ...
Loading ...
L':i.,L¸-;,:L..>-_-.:-.._-_-':J:_.*_-_ _.'4 :_:i-!--:•:..'_:_: >...•
Problem Possible Cause Solution
Not Drying Lintscreen is clogged with lint. (;lean lint screen.
Satisfactorily Restricted air movement Run dryer for 5-10 minutes. Hold
Exhaust vent or outside exhaust hand under outside exhaust hood to
hood isclogged with lint. check air movement. If you do not fee
air moving, clean exhaust system of
lint or replacem'haust vent with rigid ot
flexible heavy metal vent
(see "INSTALLATION;' Section J).
Replace with rigid or flexible
heavy metal vent
(_ee "INSTALLATION;'Section J).
Replace fuse or reset breaker.
Exhaust vent is crushed
or kinked.
One fuse is blown or circuit
breaker is tripped. The dryer
will appear to operate, but you
will not get any heat.
Timer or the temperature Select the right cycle for the types
control is set on AIR DRY. of garments being dried
(see "OPERATION").
Fabric softener sheets Use only one softener sheet per load
blocking outlet grill, ard only use it once.
Laundry center located in room Move laundry center where it can
with temperature below 45°E operate in ambient air temperatures
above 45°E
Large amount of moisture Expect longer dq! times with items
in the load. [hat hold more moisture (cottons).
Cold rinse water used. Expect longer dq/times, but you are
:savingenergy and reducing wrinkles,
Load too large and bulky Separate load to tumble freely.
to dry quickly.
Dryer Will Power cord not firmly plugged Plug power cord into a live circuit.
Not Run into a live circuit with proper
voltage.
Fuses blown or circuit Re31acefuses or reset breakers.
breakers tripped.
Using a regular fuse. Replace witha time-delay fuse.
Dryer door not firmly closed. Close dryer door tightly.
PUSH TO START DRYER Press PUSH TO START DRYER
Button not firmly pressed. Button again.
Controls not set in an Fbset controls in an ON position.
ON position.
64
Loading ...
Loading ...
Loading ...