Loading ...
Loading ...
Loading ...
ALTERNATE CONNECTION:
If local codes do not permit the
connection of a frame-grounding
conductor to the neutral wire:
STEP 1. Disconnect power.
STEP 2. Make sure the power supply
cord or direct wire cable is in place
(see steps 1-3 on page 20 for power
cord connections or steps 1-3 on pages
21-22 for direct wire connection).
STEP 3. Remove the neutral grounding
wire (green/yellow wire) from external
grounding connector screw. Loosen or
remove terminal block screws. Connect
neutral grounding wire and the neutral
wire (white or center) of power supply
cord or direct wire cable under the center
screw of the terminal block.
STEP 4. Connect the other two wires
to outer terminal block screws. Securely
tighten all electrical conections.
STEP 5. Tighten the strain rellief screws.
STEP 6. Insert tab of terminal block
cover into slot of the laundry center rear
panel. Secure cover with hold-down
screw.
STEP 7, Connect separate copper
grounding wire from external ground
connector to ar_adequate ground. If
codes permit and a separate grounding
wire is used, it is recommended that a
qualified electrician determine that the
grounding path is adequate.
Proceed with Installation on page 29.
Neutral
grounding wire
(green/yellow)
External
ground
connector
Groundingpath
determinedbya
qualified e_ectrician
Alternate 3-Wire Connection wJith
External-Grounding Conductor
Loading ...
Loading ...
Loading ...