Loading ...
Loading ...
Loading ...
17
OPERATIONS MANUAL
BOTTLE, KEG & BACK BAR COOLERS, GLASS & PLATE CHILLERS
AUXILIARY DRAIN PAN INSTALLATION
(Bottle Coolers)
1. Remove standard refrigeration/drain cover.
2. Remove plastic tubing from drain tube. Keep tubing for
new pan.
3. Feed plastic tubing onto new drain pan, and push all tub-
ing through drain hole in interior side.
4. Mount new refrigeration cover over new drain pan, and
secure to interior side using existing hole. Finish installa-
tion with self taping screws in remaining 3 holes.
PADLOCK HASP FOR SLIDING LIDS
(Bottle Coolers)
Disconnect power supply from cabinet. Place lock plate through
lid handle (see Figure 16) and position lock keeper over end of
plate. Use holes in keeper as a template to mark (2) hole loca-
tions on front ledge of your bottle cooler. Use a short drill bit
to make (2) 1/8” holes in the front top edge of the cabinet at
the locations marked. DO NOT drill any deeper than 1/4” into
cabinet top, to avoid damaging wiring and refrigeration lines
in cabinet. Position keeper and attach to cabinet with (2) tam-
per-proof screws. Place lock plate through handle and keeper.
Secure with padlock (by others) through hole in plate.
FIGURE 17: Auxiliary Drain Pan Installation
FIGURE 16: Padlock Installation
11/02/10
AUXILIARY DRAIN PAN INSTALLATION
COVER
PAN
TUBING
DRAIN
TUBE
DRAIN
HOLE
Loading ...
Loading ...
Loading ...