Loading ...
Loading ...
Loading ...
22
USING YOUR BEVERAGE DISPENSER
Mounting
bracket
Remove foam plug
from hole port
!
CAUTION
If the gas
the upright position with a chain or other means to prevent
it from being tipped over.
Reseal hole
around tubing with
the foam plug
Gas tank
placed in the
bracket
Figure 43
Figure 44
Optional gas tank external mounting bracket:
Many options are available for mounting the gas tank
outside of the beer dispenser to gain additional cold
storage space inside.
Secure the optional external mounting bracket on the
back of the beer dispenser (this is ideal for mobile
units) or mount within adjacent cabinetry (ideal for
undercounter built-in units:
3
4
appliance, see Figure 43. Do not completely tighten. Place
four screws and tighten them to secure the bracket to the
back of the cabinet. The bracket can also be fastened
to adjacent cabinetry using the provided #10 x
3
4" wood
screws.
Mark the hole locations where required using a pencil and
the slots in the mounting bracket. Drill appropriate pilot
secure the bracket per the above instructions.
The foam insulation plugs provided in the portholes are
CRITICAL to proper functioning of the unit and preventing
frost build up that can cause damage to the unit and/or
refrigerator contents. ALWAYS reseal the gas line porthole
have been properly installed.
NOTE
The optional mounting bracket is designed to hold the 5#
gas cylinder that comes with the beer dispenser. Larger
cylinders may be purchased from a third party and mounted
externally. Use the hole port on the rear of the cabinet to
run the gas line to the keg.
NOTE
Consider the length of the red air line when choosing a
place for the gas tank. The red air line supplied is 4 feet
With the gauges mounted to the gas tank place the tank in
the mounting bracket.
Remove the foam plug from the hole port as shown in Fig-
ure 46, and feed the red gas line through the rear wall and
out the coil cover on the inside of the cabinet. Connect the
red gas line to the keg coupler.
Reseal the hole in the back of the cabinet with the foam
plug. See Figure 47.
Loading ...
Loading ...
Loading ...