Marvel 1256381 MO24BNS2LS+S42418648 24 Inch Built-in Outdoor Beer Dispenser with Dual Tap Dispenser, 5.7 cu. ft. Capacity, Dynamic Cooling Technology, Prime Controls and Door Lock in Stainless Steel

User Manual - Page 18

For 1256381.

PDF File Manual, 68 pages, Read Online | Download pdf file

1256381 photo
Loading ...
Loading ...
Loading ...
18
USING YOUR BEVERAGE DISPENSER
Tap Equipment and Assembly
Your dispensing kit includes the following parts:
Polished stainless steel tower with clear beer line (single

Tower Gasket
Phillips oval head screws



Empty 5 pound gas tank

Faucet wrench
Tools required for installation:
Flat bladed screwdriver
Phillips screwdriver
Pliers
Adjustable wrench or a 1
1
8" open end wrench
1
2" open end wrench
Barrel Sizes
1/6 barrel 1/4 Barrel 1/2 Barrel
Height
23
5
16"

14
13
16"

23
5
16"

Diameter
9
1
4"

17"

17" to 17
1
4"

Gallons 5.23 7.75 15.5
#12 ounce
Glasses
55 82 165
This beer dispensing unit will support one half (
1
2
or one quarter (
1
4
support two sixth (
1
6
quantity of beer in each barrel size.
Table C
Table D
Keg Size
#of kegs per
5 pound gas Tank
5 gallon Corny 15 to 22
1/6 barrel 14 to 21
1/4 Barrel 10 to 14
1/2 Barrel 5 to 7
Gas can be dangerous. If it becomes di󰀩cult to
breathe and/or your head starts to ache, a high
concentration of carbon dioxide may be present.
Leave the area immediately.
The gas tank must always be connected to the
regulator. Never connect the tank to the keg.
The gas tank must be securely mounted in the
upright position. Secure it with the chain pro-
vided.
Never drop or throw the gas tank.
Keep the gas tank away from heat.
Ventilate the area after a gas leak.
!
WARNING
1. Remove shelving and packaged components from
the interior of the refrigerator before beginning the
assembly process.
2. Take your empty 5 pound gas tank to your local gas

your "yellow pages" under "Welding Supply" or "Fire
Protection". One 5 pound tank can process many kegs

3. Tower Mounting: DO NOT REMOVE INSULATION
INSIDE OF STAINLESS STEEL TOWER. INSULATION
KEEPS BEER IN CLEAR LINE COLD AND FRESH.
Mounting Tower to Refrigerator Top: Remove the
foam plug from the porthole and DO NOT reseal.

into the tower and keep the beer line cold.
Mounting Tower to Counter Top: Remove the foam
plug from the porthole and use to "bridge" the gap
between the top of the cabinet and the underside of the

into the tower and keep the beer line cold.
Loading ...
Loading ...
Loading ...