Loading ...
Loading ...
Loading ...
INSTALLINGAND USING
THE EDGE GUIDE conto
6 Ptace the edge guide firmly
against the edge of the workpiece
(See Fig, t4a) Doing this will
give you a true cut without
pinching the blade.,
7, BE SURE that the guiding
edge of the workpiece is
straight so you can get
a straight cut.,
8, ALWAYS LETTHE BLADE
REACH FULL SPEED, then
carefully guide the saw into the
workpiece,, DO NOT bind the
blade in the cut. Push the
saw forward at a speed where
the blade is not laboring.
Fig, 14
Fig, 14a
HOWTO SETYOUR BEVEL ANGLE (Fig. 15)
. Unplug the saw,
Z_ WARNING: ALWAYS unplug saw before making any adjustments. Failure to
unplug the saw could result in accidental starting which can cause serious personal
inju_,
2. Loosen bevel adjustment lever (see Fig 15),
3 Raise the motor housing end of the saw
until you reach the desired angle setting
on the bevel scale.
4. Tighten the adjustment lever securely,
Fig, 15
Bevel
23
Loading ...
Loading ...
Loading ...