Loading ...
Loading ...
Loading ...
USING THE LASER TRAC TM LASER LIGHT FEATURE (Fig° 8)
/_ WARNING: LASER LIGHT. LASER RADIATIONo Avoid Direct Eye Exposure.
DO NOT stare into beam. Only turn laser beam on when the saw is on the workpieceo
Class itla laser°
NOTE:Your circular saw has a built-in laser light.To activate laser light switch,
saw must be plugged into power source.
2,,
3,,
4.
5.
6.
DO NOT turn thelaser beam on until the saw
ison theworkpiece.
Markthe lineof cuton the workpiece
Adiust the cuttingangle and cutting depth
asneeded..
Plug inthe sawand push the laserswitch
forwardto turn on the laser.
Align laserbeam with line-of-cut (see Fig 8).
Squeezethe trigger switch and slowly push
the saw forward using both hands..Keep the
redlaser beam onthe line-of-cul.
Alwaysshut off thelaserlight when you are
finishedcutting.
Fig. 8
(
/_ CAUTION: The Laser enhancing safety glasses that were included will
enhance the laser light in bright light conditions_.DO NOT wear these glasses if they
interfere with the safe operation of this saw.
LED WORKLIGHT (Fig. 9)
Your circular saw has a builtqn worklight for
better visibility when cutting. This light is
always "ON" when saw is plugged into power
source
19
Loading ...
Loading ...
Loading ...