Loading ...
Loading ...
Loading ...
How To Use Your Pressure Washer
On the end of yourspray gun is a nozzle that you can
slide forward and backward and that you can also
twist from side to side. With the adjustable nozzle you
can adjustthe spray pattern to either high pressure
or low pressure. You can also adjust the spray so it is
concentrated in a stream pattern or expanded into a fan
pattem.
Slide the nozzle in a forward position to draw chemical
and achieve low pressure. Pull nozzle back for high
pressure.
HIGH PRESSURE LOW PRESSURE
To adjust your spray pattern twist the nozzle
clockwisefor fan spray orcounterclockwisefor
stream spray.
FAN SPRAY
STREAM SPRAY
For mosteffectivecleaning, keep spray nozzle
between 8 and 24 inchesfrom cleaning surface.
IMPORTANT: If you get spray nozzle too close,
especially on high pressure, you may damage the
surface you are cleaning.
Using Soaps/Chemicals
IMPORTANT: Use soaps and chemicalsthat are
designedspecificallyfor use with pressure washers,To
apply soaps/chemicals follow these steps:
Preparethe soap/chemical as requiredby yourjob.
Insertsoap/chemicalline intoyourcontainer(soap/
chemicalsand containernot included),
CHEMICAL
HOSE --
CHEMICAL
Slide the adjustable nozzle forward to low pressure
mode. Soap/chemicals cannot be applied with nozzle
in high pressure position.
Reviewthe use of the adjustable nozzle.
Connect garden hose to water inlet(see"To Start Your
Pressure Washer" on page 9).Check that high
pressure hose is connected to spray gun and pump
(seeAssembly), and start engine.
Apply soap/chemicals to dry surface, starting from the
bottom and working up.
Allow the soap/chemicals to soak in between 3-5
minutes before washing and dnsing.
When rinsingon high pressure, startat lower portion
of areato be washed and work upward, usinglong,
even, overlappingstrokes.
10
Loading ...
Loading ...
Loading ...