Loading ...
Loading ...
Loading ...
Usingtheclock, timerand controllockout. , .GEA li,,co,.com
Make sore the clock is set to the
correct time of dug
ToSet the Clock
The clock must be set to tile correct time
of day for the automatic oven timing
functions to work properly. The time of
day cannot be changed during a timed
baking or self-cleaning cycle.
[] Touch tile CLOCKpad.
[] Touch tile number pads.
[] Touch tile STARTpad.
The timer is a minute timer only.
The timer does not control oven
operations, Themaximum setting on
the timer is 9 hours and 59minutes,
To Set the timer
[]
[]
Touch tile KITCHENTIMER
ON/OFFpad.
Touch tile number pads until tile
amount of"time you want shows
in tile display. For example, to set
2 hours and 45 minutes, touch 2, 4
and 5 in that order. If you make a
mistake touch tile KITCHENTIMER
ON/OFFpad and begin again.
[] Touch the STARTpad.
After touchingtheSTARTpad,SETdisappears,
thistellsyouthetimeiscountingdown,although
thedisplaydoesnotchangeuntiloneminutehas
passed.Secondswillnotbeshownin thedisplay
untilthelastminuteiscountingdown.
[] When the timer reaches :00, the
control will beep 3 times followed
by one beep evmT 6 seconds until
tile KITCHENTIMERON/OFFpad
is touched.
The&secondtonecanbecanceledbyfollowing
thestepsin theSpecialfeaturesofyouroven
controlsectionunderTonesat theEndofa
timedCycle.
To Reset the timer
If"the display is still showing tile time
remaining, you may change it by
touching tile KITCHEN TIMER ON/OFF pad,
then touch the number pads until tile
time you ,a-ant appears in tile display.
lfthe remaining time is not in the display
(clock, delay start or cooking time are in
the display), recall the remaining time by
touching tile KITCHENTIMERON/OFFpad
and then touching the number pads to
enter the new time you want.
To Cancel the timer
Touch the KITCHENTIMERON/OFF
pad twice.
Control Lockout
Yourcontrolwillallowyoutolockoutthetouch
padssotheycannotbeactivatedwhenpressed.
To lock/unlock the controls:
[] Touch the 9 and 0pads at tile same
time for 3 seconds, until tile display
shows LOCON.
[] To unlock the control, touch the 9
and 0pads at tile same time for 3
seconds, until the display shows
LOCOFF.
When this fi?ature is on and tile touch
pads are touched, the control will beep
and tile display will show LOCON.
i;5_Thecontrollockoutmodeaffectsall touch
pads.Notouchpadswill workwhenthis
featureisactivated
N Theadjustmentwill beretainedinmemory
afterapowerfailure.
13
Loading ...
Loading ...
Loading ...