536884351 Owner's Manual

Loading ...

OPERAT

, ,,,,,, ,,,,,,, .,...,,,.. ,

i i..m, i,, ii1., i,, ,m,mmm,,i ,,,m,,l, ,, ,,H,

The operation of any snow thrower can result inforeign objects being thrown into the

eyes, which can result in severe eye damage Always wear safety glasses or' eye

shields while operating the snow thrower

We recommend standard safety glasses or a wide vision safety mask for over your

_ glasses, available at SEARS Retail Stores or SEARS Service Centers

i i ,N, Hm,,,, ,H , ,,,,,,,,

i i ,,,,,, H,m

HOW TO USE YOUR

SNOW THROWER

TO STOP YOUR SNOW THROWER

@ To stop the auger, release the auger control bar

NOTE: If the auger continues to creep, refer To Adjust

Auger Control Cable paragraph on page 14..

@ To stop the engine, turn key to the OFF position

TO CONTROL SNOW DISCHARGE

@ Turn the chute control rod to set the direction of the

snow throwing.

@ Loosen the wing knob on the chute deflector and

move the deflector to set the distance Move the

deflector UP for more distance, DOWN for less

distance Then tighten the wing knob (See Fig. 3).

TO USE AUGER PROPEL ACTION

@ Squeeze the auger control bar down against the

upper' handle to allow the auger to turn

e To propel forward, raise the handle to allow the

rubber auger blades to contact the ground (See Fig

4),

FIG. 3

AUGER

PROPELLI

POSITION

. NORMAL

; OPERATING

POSITION

AUGER

BLADES

............................. j,,

FIGo 4

H, ,1,,,,,,,1,

CAUTION: READ OWNER'S MANUAL

BEFORE OPERATING MACHINE

NEVER DIRECT DISCHARGE TOWARD

BYSTANDERS°

RELEASE THE AUGER CONTROL BAR

AND STOP THE ENGINE BEFORE UN-

CLOGGING DISCHARGE CHUTE OR AU-

GER HOUSING AND BEFORE LEAVING

THE MACHINE

Loading ...

Owner's Manual - Page 9