Loading ...
Loading ...
Loading ...
22
Burners operation
Lighting Burners
All burners are ignited by electric ignition.
There are no open-ame, “standing” pilots.
Work-top Burners
To light the surface burners, push and turn
the appropriate control knob anticlockwise to
maximum ow position . This control is both
a gas valve and an electric switch.
When gas is permitted to ow to the
burners, the electric igniters start sparking.
On all surface igniters you should hear a
“clicking” sound. If you do not, turn off the control and check that the unit is plugged
in and that the fuse or circuit breaker is not blown or tripped.
Within a few moments, enough gas will have traveled to the burner to light. When
the burner lights, turn the burner control to any position from maximum to
minimum ow position to adjust the ame size. Setting the proper ame height
for the desired cooking process and selecting the correct cooking vessel will result in
superior cooking performance, while also saving time and energy.
Power burner with simmer
The range is provided with a powr burner with simmer, a special burner featuring a
very high exible range of cooking settings: from 750 Btu/h for simmering, melting or
steaming rice, to 18000 Btu/h for the most powerful performance.
To light the surface burners, push and turn the appropriate control knob anticlockwi-
se to maximum power of inner ring.
The inner ring lights at its maximum power. Then you can continue to use only the
inner ring and adjust the ame power by turning the control knob from to
position. If you need to light on also the external ring, continue to turn anticlockwi-
se the knob and make a little pressure on it in order to cross the lock located after
the minimum power position of internal ring. The external burner lights on; ame is
adjustable turning the knob from to position.
OFF
= Closed position
= “Full on” position
internal ring
= “Full on” position
esternal ring
Worktop burner knob + simmer
Loading ...
Loading ...
Loading ...