Loading ...
Loading ...
Loading ...
SERVICE AND ADJUSTMENTS
CAUTION: BEFORE PERFORMING ANY SERVICE ORADJUSTMENTS:
Depress clutch/brake pedal fully and set parking brake.
Place gearshift lever in neutral (N) position.
Place attachment clutch in "DISENGAGED" position.
Turn ignition key "OFF" and remove key.
• Make sure the blades and all moving parts have completely stopped.
• Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with
plug.
TRACTOR
TO REMOVE MOWER (See Fig. 15)
Mower willbe easier toremove from the rightside oftractor.
• Place attachment clutch in "DISENGAGED" position.
• Moveattachmentliftleverforwardtolowermowertoits
lowest position.
• Roll belt off engine pulley.
• Remove small retainer spring, and liftclutch spring off
pulley bolt.
• Remove large retainer spring, slide collar off and push
housing guide out ofbracket.
• Disconnect anti-swaybar from chassis bracket by re-
moving retainer spring.
• Disconnect suspension arms from rear deck brackets
by removing retainer springs.
• Disconnect front linksfrom deck by removing retainer
springs.
• Raise lift lever to raise suspension arms. Slide mower
out from under tractor.
SMALL RETAINER
CLUTCH SPRING
IMPORTANT: IF AN ATTACHMENT OTHER THAN THE
MOWER DECK IS TO BE MOUNTED ON THE TRACTOR,
REMOVE THE FRONT LINKS AND HOOK THE CLUTCH
SPRING INTO SQUARE HOLE IN FRAME.
TO INSTALL MOWER (See Fig. 15)
• Raise attachment liftlever to itshighest position.
• Slide mower under tractorwith discharge guard to right
side of tractor.
• Lower liftlever to its lowest position.
• Install mower in reverse order of removal instructions.
S
"" %" SQUARE HOLE
SUSPENSION ARMS
ENGINE PULLEY
FRONT LINK
ANTI-SWAY BAR
COL
RETAINER SPRINGS
(BOTH SIDES)
HOUSING GU
RETAINER
SPRING
BRACKET
FIG. 15
18
Loading ...
Loading ...
Loading ...