Loading ...
Loading ...
Loading ...
CUSTOMER RESPONSIBILITIES
MAINTENANCE SCHEDULE ___ _/,o_/_ _/_o_/
F,L ,NOAT S
AsYouCOMPLETE
REGULARSERVICE f_._.7 ¢ _/'_-'._F_y_,._-_.._SERVICE DATES
Check Operator Presence and
T Interlock Systems V'
R Check for Loose Fasteners If 1#17 V'
A Sharpen/Replace Mower Blades
T Lubrication Chart V'
0 Check Battery Level
R Clean Battery and Terminals I_#
Check Transaxle Cooling if
Adjust Blade Belt(s) Tension 1##5
Adjust Motion Drive Belt(s) Tension I_#'s!
i Check Engine Oil Level iI/
Change Engine Oil 1_1,2,: I_
E Clean Air Filter Vm2 1
i (_1 Clean Air Screen t##2
Inspect Muffler/Spark Arrester _'
Replace Oil Filter (If equipped) _22
N Clean Engine Cooling Fins
Replace Spark Plug _' If
Replace Air Filter Paper Cartridge V'2
Replace Fuel Filter V'
1 - Change more often when operating under a heavy load or in high ambient temperatures 5 - If equipped with adjustable system.
2 _ Service more often when operating in dirty or dusty conditions. 6 - Not required it equipped with maintenance-free batte N,
3 - if equipped with oil filter, change oil eve_ 50 hours. 7 - 13ghten front axle pivot bol_ to 35 ft.-Ibs maximum.
4 - Replace blades more often when mowing in sandy soil. Do not overtighten.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover items that have
been subjected to operator abuse or negligence. To receive
full value from the warranty, operator must maintain tractor
as instructed in this manual,
Some adjustments will need to be made periodically to •
properly maintain your tractor.
All adjustments in the Service and Adjustments section of
this manual should be checked at least once each season.
• Once a year you should replace the spark plug, clean or
replace air filter, and check blades and belts for wear. A
new spark plug and clean airfilter assure proper air-fuel
mixture and help yourengine run better and last longer.
BEFORE EACH USE
• Check engine oil level,
• Checkbrakeoperation.
• Check tire pressure,
Check operator presence and
interlock systems for properoperation.
• Check for loose fasteners.
LUBRICATION CHART
_)SPINDLE
ZERK ZERK
(_FRONT
BEARING ZERK
'_)FRONT WHEEL
BEARING ZERK
NE
14
i _)GEARSHIFT
- -' PIVOTS
_)SAE 30 OR 10W30 MOTOR OIL
_GENERAL PURPOSE GREASE
_)REFER TO CUSTOMER RESPONSIBILITIES "ENGINE"
SECTION
IMPORTANT: DO NOT OIL OR GREASE THE PIVOT
POINTS WHICH HAVE SPECIAL NYLON BEARINGS.
VISCOUS LUBRICANTS WILL ATTRACT DUST AND DIRT
THAT WILL SHORTEN THE LIFE OF THE SELF-
LUBRICATING BEARINGS. IF YOU FEEL THEY MUST BE
LUBRICATED, USE ONLYADRY, POWDERED GRAPHITE
TYPE LUBRICANT SPARINGLY.
Loading ...
Loading ...
Loading ...