Loading ...
Loading ...
Loading ...
8
PHONO RCA OPT USB BT
PHONO RCA OPT USB BT
Setting up TUK
Start-up / Shut-down time
TUK can take up to 6 seconds to boot up and shut down. During this time the speaker will not
respond to remote commands or adjustments to the Volume / Input knob. Do not attempt
to adjust any settings while TUK is starting up as it may cause a jarring change when audio
starts playing.
Channel Swap
You can swap the L / R stereo output on TUK. This can be helpful in situations where you want
to place your speakers correctly, or need to reach power outlets / inputs, ensuring correct
stereo image in any conguration. The active speaker is set to the left channel by default.
To use the active speaker on the right, press and hold the Next Track button for 5 seconds.
You will see the Input LEDs light up from left to right to conrm the output is swapped. To use
the active speaker on the left, press and hold the Previous Track button for 5 seconds. You
will see the Input LEDs light up from right to left to conrm the output is swapped. The L / R
stereo output will be reset to default (active speaker is Left Channel) upon power-cycle.
Default
Loading ...
Loading ...
Loading ...