Loading ...
Loading ...
Loading ...
12
Connecting Bluetooth
TUK features Bluetooth 4.2 with Qualcomm® aptX™, aptX™HD and AAC codecs and can be
paired with many devices for wireless audio playback from your phone, MP3 player or tablet.
Pairing is easy.
1. Press the Input button on TUK’s remote to select BT as the input source. You can also cycle
through inputs by pressing the knob on the front of TUK. The BT Input LED will blink slowly
for 8 seconds while it attempts to pair with the last known device. If unsuccessful, TUK
will enter pairing mode automatically, indicated by rapid blinking of the BT Input LED. You
can also enter pairing mode manually by pressing the Bluetooth Reset button ( ) on the
remote (see diagram of Remote Control on Pg. 6 – button #10).
2. Enable your Bluetooth device to search for a new device to pair with. Select ‘TUK by Kanto’
from the list of Bluetooth devices available for pairing.
3. If pairing is successful, the BT LED will remain solid. You will not need to pair the same
Bluetooth device again - ‘TUK by Kanto’ will remain on your device list until you remove it
from the list.
4. If the device does not pair with TUK, press the Bluetooth Reset button ( ) on the remote
or turn o Bluetooth on your device and turn it back on again, then repeat Steps 1 to 3.
Alternatively, you can turn the speaker’s Power Switch to the OFF position, then back to ON.
Bluetooth Operation
1. We recommend keeping a maximum distance of less than 10 meters (33 ft) between the
speaker and your device. The best signal delity is within this range.
2. You can stream audio from your device to the speaker using either the player control
buttons of your device or the control buttons of the remote control (see diagram of Remote
Control on Pg. 6 of this manual – buttons #12, #13, and #14).
3. Take note of the following behavior and functionality during Bluetooth operation. When
you are successfully connected, the BT Input LED will be lit solid, and your device will show
as connected to ‘TUK by Kanto’.
4. The connection between speaker and device remains active even if input source has
changed. For instance, you can switch to another input source (e.g. RCA) and return to
Bluetooth operation without losing signal connection and, therefore, do not need to pair
with the device again.
5. While the speaker can be paired with more than one device, only one device can play and
transmit audio at a time.
6. The TUK remote control features a Bluetooth Reset button to quickly disconnect a paired
device and allow a second device to pair with the speaker. Press Bluetooth Reset button
( ) to disconnect a paired device if necessary.
7. Follow the pairing instructions to pair another device.
8. The same behavior and functionality apply to the second device.
USB Charging Operation
TUK features one 5V / 2A USB charging port on the back panel. This is a convenient power
source for mobile or smart home devices.
When TUK is in Playback Mode and Standby Mode, the port is active, and whatever device is
connected is able to draw up to 2 amps of power.
Loading ...
Loading ...
Loading ...